Rexroth CDT3MT1 50 28 205Z20 B11HDDMWW Hydraulic Cylinder High Quality Stable / Reliable
Product Description:
Advantages and features of Rexroth hydraulic cylinders
High power density and large thrust output
Hydraulic cylinders achieve energy conversion based on Pascal's law. Under the same volume, they can output thrust and torque far exceeding that of transmission devices such as motors. For example, heavy-duty press cylinders can generate thousands of tons of pressure to meet metal stamping needs;
Rexroth cylinders use high-precision ball screw transmission systems to achieve high-performance output in a compact structure, suitable for industrial scenarios with limited space.
Motion smoothness and precise control
The flow of hydraulic oil is controlled by throttle valves, speed control valves or servo valves to achieve stepless speed regulation and micron-level displacement accuracy, which is suitable for scenarios with strict stability requirements such as injection molding machine mold closing and high-precision machine tool feeding;
Supports integration with sensors and control systems to achieve real-time monitoring and intelligent feedback adjustment of parameters such as pressure and displacement, and improve the level of automation.
Reliable structure and environmental adaptability
The core components are made of wear-resistant alloy material, and the sealing system is optimized. It can withstand high temperature (≤90℃), low temperature (-30℃), humid and dusty environment, ensuring the stability of mining machinery, metallurgical equipment and other harsh working conditions;
The modular design supports a variety of structures such as piston type, plunger type, telescopic type, etc., which are suitable for different loads and travel requirements, such as dump truck lifting or fire ladder extension.
Energy saving and convenient maintenance
Energy consumption is reduced through low-friction surface treatment technology and regenerative braking function. Some models support bio-based hydraulic oil to reduce environmental pollution;
The simplified structural design reduces the difficulty of maintenance, and key components are compatible with quick replacement to reduce downtime.
Precautions for using Rexroth hydraulic cylinders
Fluid and installation specifications
The cleanliness of the hydraulic oil must meet the NAS 1638 standard (recommended level 7-9). Before installation, thoroughly flush the pipeline and configure a 10μm high-precision filter to prevent particles from wearing the seals and the inner wall of the cylinder;
During installation, the coaxiality of the cylinder and the load must be calibrated to avoid eccentric loading causing piston rod bending or seal failure.
Operation and maintenance requirements
Overpressure operation is prohibited (rated pressure refers to the specific model parameters), oil temperature (≤65℃) and vibration signals are monitored regularly, and the machine is shut down immediately for inspection when abnormal;
Check the wear of the seals every 500 hours, replace the hydraulic oil and clean the oil tank every 2000 hours, and use original accessories during maintenance to ensure compatibility.
Measures for special working conditions
The oil must be drained and anti-rust oil must be injected before long-term shutdown. When starting in a cold environment, preheat the hydraulic oil to above 15℃ to prevent wear caused by decreased low-temperature fluidity;
For high-frequency reciprocating motion scenarios, it is recommended to install a buffer valve or accumulator to reduce the damage of hydraulic shock to the piston rod.
Intelligent system adaptation suggestions
When integrating PLC or intelligent control systems, it is necessary to verify the compatibility of the interface protocol to avoid signal delays or command conflicts;
Fault diagnosis should prioritize data analysis through the remote monitoring module. For complex problems, contact the authorized service provider. Non-professionals are prohibited from disassembling the valve block or adjusting parameters.
| Max Pressure | 1000 psi |
| Mounting Style | Threaded |
| Cushion Type | Adjustable |
| Piston Type | Single Acting |
| Bore Diameter | 4 inches |
| Warranty | 1 year |
| Rod Diameter | 2 inches |
| Material | Steel |
| Stroke Length | 12 inches |
| Model | OC-100 |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.
Product Tags:
|
|
Nitrile Seal Rexroth Hydraulic Cylinder 12 Inches CDT3MT1 50 28 205Z20 B11HDDMWW Images
|
